KEN BLOCK 2015 FORD FIESTA ST RX43 WR8 3.0

Produto n.º: AD3249
Preço: 499,95 €
Disponibilidade: A pedido

KEN BLOCK 2015 FORD FIESTA ST RX43 WR8 3.0

  • Fabricante: HPI
  • Fabricante - Catálogo n.º: HPI-115458

KEN BLOCK 2015 FORD FIESTA ST RX43 WR8 3.0

HPI-115458

 

KEN BLOCK'S
INTERGALACTIC
INSANE, INTENSE ACTION!

The amazing "Intergalactic" version of Ken Block's latest Ford Fiesta ST RX43 racer is now available in a 1/8th scale WR8 nitro version! HPI Nitro Star G3.0 power is able to propel Ken's replica from a standing start into wild racing action with a simple pull of the trigger, so it's the perfect way to copy Ken's epic performances with your friends!

Underneath the replica Ken Block Ford Fiesta ST RX43 body, the WR8 3.0 chassis is based on the HPI Bullet RC monster truck, which means it's massively tough and can take a real beating on- or off-road! The WR8 3.0 is powered by an easy-to-use and powerful Nitro Star G3.0 engine with all-aluminum construction and 32,000 max RPM, delivering power through the same tough bevel gear differentials and fully ball bearing-supported 4WD shaft drivetrain of the Bullet monster truck. Combine this with WR8 rally-style suspension geometry, custom-designed shock towers and dampers and extra-thick sway bars for extra control! Top it off with semi-slick tarmac tires and replica fifteen52 TurboMac and Turbo-Fan wheels and you've got an instant head-turner in your hands! 

The WR8 is crammed with awesome features that enhance its durability anywhere you want to take it, including a high ground clearance, skidplate, foam front bumper, optimized rally-style suspension geometry, shock debris guards, mud deflectors on the chassis and much more. It's the ideal machine to race your friends on Gymkhana-style courses and multi-surface tracks, or anywhere you like!

Like all HPI Racing RTR (Ready-To-Run) cars, the WR8 3.0 is completely pre-built: all you have to do is open the box, install the batteries and add fuel and you're ready for awesome stunt action! HPI Plazma AA batteries are included for the transmitter and car, all you have to provide is RC nitro car fuel from your local RC model shop.

Flux& Micro versions also available

2.4Ghz Radio System

EASY TO DRIVE!

The HPI WR8 3.0 is super-easy to drive and get familiar with – all you have to do is install a battery, plug it in and switch on the radio and car. It’s that easy! To drive the car, simply pick up the controller with your left hand, put your left index finger into the trigger area, and then put your right hand on the steering wheel – it’s as natural as driving a real car! Turn the wheel to go left and right, and gently pull on the trigger with your left index finger to go forwards. To stop the car, gently push away from you with your left index finger to brake the car from insane top speeds to a gentle stop. It takes seconds to get used to this easy operation, and in no time at all you’ll be ripping off jaw-dropping moves, just like Ken Block in his nail-biting head-to-head races!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Tunable suspension

SUSPENSION JUST LIKE KEN’S REAL CAR!

Fans of racing cars, from real ones to little ones, know that to get the best out of your car you need to have a sturdy, tuneable suspension system. That’s why the HPI WR8 uses double wishbone suspension at all four corners, fitted with real coil over oil-filled shock absorbers and thick sway bars front and rear, just like real racing cars! Thick main suspension arms are mated to durable uprights fitted with a pair of rubber-sealed ball bearings for performance that matches Ken’s Ford Fiesta ST RX43.

DUAL DISK BRAKES

With all the power the Nitro Star G3.0 H.O. puts out, the WR8 3.0 uses disc brakes

 to slow down, just like real racing cars! Twin steel disc brakes provide all the stopping 

power that's needed for the car, and are set up out of the box to provide perfect, 

neutral brake action for predictable control as you approach the corners.

 The brakes can also be independently adjusted to give more front or rear stopping power

, just like on Ken's real race car! The throttle servo that controls the carburetor opening

 also controls the twin brakes, with tough fiber brake material taking speed off the twin

 spinning steel discs that rest on the front and rear driveshafts. Control the action with real disc brakes! 

 

Nitro Star Engine

G3.0 HIGH-OUTPUT NITRO ENGINE

The Nitro Star G3.0 H.O. engine is a super-powerful upgraded engine based on the already strong G3.0 used in the HPI Firestorm and Bullet 3.0 trucks. The engine is fitted with a steel flywheel for smooth idling and a racing-style 2-shoe clutch for excellent acceleration and throttle response. If you want instant wheelspin, you've got it! The power from the G3.0 H.O. engine is unbelievable, and with up to 32,000RPM you'll get screamingly fast speeds at the pull of a trigger! A 2-stage air filter protects the carburetor opening from dirt and dust, and the tall forged aluminum heat sink head allows the engine to keep its cool. An all-aluminum exhaust system unlocks the horsepower from the engine and throws out a real trail of engine exhaust at top speed! 

Image of wheels

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Contactos

PRmodelismo

Rua das Lagomas - Edificio Santista Fração F Numero 115 , São Roque Oliveira de Azeméis
São Roque - Oliveira de azeméis
3720-703 SÃO ROQUE

914016602- Pedro Ferreira
913063701- Pedro Reis
256068844 - Loja